Features
High quality, Low cost, Easy to use Accommodates both PQFP and QFP parts Silkscreened pin numbering makes wire-wrapping and probing a snap Available with 1 inch wire-wrap posts, or .018" DIA gold machine pins Standard pin spacing accommodates a wide variety of prototyping boards Comprehensive User's Manual and Adhesive-backed label sheet included
LED status indicator, use to monitor Vcc or user selected signal level
ProductivityThe ANC-9232 adapter provides a quick and efficient means for the designer to wire-wrap prototypes of equipment which are based on 132-pin QFP or PQFP type chips. Save hours of breadboarding, debugging, and rework time doing your next prototype. Concentrate on the design, not the proto construction. We also offer a ANC-9100, which accepts a 100-pin PQFP type component.
Test points on each component lead provide the designer with a numbered connection for oscilloscope and logic analyzer probes. Ever removed or installed an IC from a prototype card that was "powered up"? An LED circuit on the adapter board provides a user definable indication of operation or "power-on" light.
The user's manual includes an adhesive backed universal numbering sheet, which identify pins on the wire-wrap side to guide the wire-wrap process, and a numbered pin designation sheet to use as a signal reference.
The adapter pins are spaced 0.1" apart on 0.3" centered rows for use on a wide variety of prototyping boards. You can download
an Adobe PDF formatted mechanical of the 132-pin PQFP adapter.
pin 1 is located center of top side on all versions
If you need more information on Antona's products and services, please Contact Us for a quick response.
Updated 02/21/09 12:00
Copyright © 1998-2009 Antona Corporation, L.A., CA., U. S. A.