Antona Logo         ANC-6185
Antona  Home
Price
Order
Contact

Search

ANC-6185 Links

User's Manual HTML Format PDF Format

DVR Pan/Tilt/Zoom Control
RS232/RS422 Troubleshooting

Used with this product
25' UTP CAT-5 kit, ANC-CKIT
Extn. Pwr Supply, ANC-XPWR

Related RS485/422 Products
RS-485/422 Internal Adapter
RS-422 with Video Sync Intr

Auto Data Transmit:
DB-9F SMPTE

Other Products
Current Products
Prototyping SMD Adapters
Single Board Computers
ISA Relay, Digital I/O
Ethernet Adapter
CMOS/TTL Adapter

 Antona Corporation
Contact us

RS-232/RS-485-422 ANC-6185 terminal block/RJ-45 version
RS485/422 Serial Adapters

The ANC-6185 adapters provide the designer with a low cost solution to change RS-232C level transmit and receive level signals into RS-485, and RS-422 differential level noise immune signals.

 

Features
  • RoHS Compliant - Lead Free parts and manufacturing
  • Port powered for most applications
  • Transmit data at distances up to 4,000 feet (1,219 m)
  • Auto transmit (AutoXmit) enable is available at baud rates up to 64K baud
  • 4-wire full duplex or 2-wire half duplex operation
  • Baud rates to 1 MBaud
  • Terminal Block (ANC-6185T) or 8-pin RJ-45 Connector (ANC-6185R) versions
  • LED option for transmit and receive status (ANC-6185TL or ANC-6185RL)
  • Use with low cost CAT-5 cable
  • ANC-6085 version for multimedia applications intefacing to SMTPE DB-9
Overview

Hardware Flexibility
RS-422/485 - signal levels meet or exceed the Recommended Standards.  The RS-232C side mates directly with a PC serial port.  This makes the adapters an ideal solution for connecting external RS-485/422 equipment up to your PC compatible computer.

Software Compatibility
Because the adapter just converts RS-232C to and from RS-485/422 level signals, no specific software modifications are required to operate with off-the-shelf applications that use the serial communications port.  The data direction can be changed on the adapter by using either the RTS line or the AutoXmit feature of the adapter.

Easy to Use
Shipped ready for installation. Jumpers are pre installed for the most commonly applied  configuration and a comprehensive user's manual is included.

Warranty
Every Antona product is built and tested to meet high standards of quality and reliability.  Our products are covered with a one year warranty.

Specifications
 
Product ANC-6185T  ANC-6185R 
RS485/422 Wiring Discrete wire CAT-5 Ethernet Cabling RJ-45 male
Interface Converts to/from RS-232 to 
RS-485 or 
RS-422 
RS-232 to 
RS-485 or 
RS-422 
RS-485/422 Connector 6-pin terminal block 8-pin RJ-45
Dimensions
2.9" x 1.3"

3.0" x 1.3"

 
Control Signals  RS232: RTS, DTR, TXD
Baud Rate  to 1M baud 
Impedance  120 ohms 
voltage 3V @7ma minimum 
External Power  +3v to +12v 

Note: RTS connected to DCD, DTR connected to DSR
 

Updated Apr 29, 2009
© Antona Corporation 2003-09 All Rights Reserved